Welcome to Shenzhen GTL Technology Co., Ltd.
PCB Layout Design, Board Making, SMT One-stop Service Provider
New Fourth Board Listing Code:669307

0755-2997 6660

SMT贴片首件表面组装板焊接与检测

Release Time:2022-03-07 Edit the author:金致卓 Reading:7125

等线SMT加工厂的首件是指满足焊接质量要求的表面组装板。

一、第一块表面贴装板焊接将通过安装、检查平台的表面贴装电路板放在网状传送带或链条导轨上,表面贴装板根据其设定的速度水平用传送带缓慢进入炉内,并通过加热区。保温区、回流区和冷却区,完成SMT贴片加工再流焊。及时在出口拿起表面贴装板。操作时应佩戴防静电带。

二、首件表面贴装板焊接质量检查

(1)检验方法

首块表面组装板上SMT贴片的焊接质量,根据组装密度选用2 ~ 5倍放大镜或3 ~ 20倍显微镜。

(2)检查内容

检查焊接是否充分,SMT芯片加工过程中是否有锡膏熔化不充分的痕迹。

检查焊点表面是否光滑,、有无孔洞缺陷及孔洞大小。

检查焊锡量是否适中,焊点形状是否为半月形。

检查焊球和残留物的数量。

检查立柱、虚焊、桥、部件位移等不良率。

还要检查PCB表面的颜色变化。SMT芯片回流焊后,PCB允许有少量但均匀的

颜色变化。

(3)检验标准

按本单位制定的企业标准或参照其他标准执行。目前大多数SMT芯片加工厂

采用IPC-A-610E。

三、根据第一块表面贴装板的焊接质量检查结果调整参数。

①调整参数,方便对、汇总分析。

②首先调整(微调)输送带速度,重新测试温度曲线,试焊。

③如果焊接质量不能满足要求,调整各温区的温度,直到焊接质量满足要求

Disclaimer: this article is derived from Jin Zhizhuo website integration, such as articles and draft involve issues of copyright, the author in the contact, please in this website, we will deal with as soon as possible.
Address:http://www.gtl-tech.com/news/12.html
Share the:
If need to solve a problem, please join our WeChat customer service or online customer service;
News

Technological companies focusing on electronic design, PCB Layout design, PCB board making, SMT patch one-stop service

Sales Hotline:0755-2997 6660
Service Specialist:136 7015 5505
Email:gtl@gtl-tech.com
Add:Six Floors of Building B11, Hengfeng Industrial City, Hezhou, Hangcheng Street, Baoan District, Shenzhen

微信公众号

Copyright © 2018 Shenzhen GTL Technology Co., Ltd. All Right Reserved. 粤ICP备17007908号

在线
客服

在线客服服务时间:9:00-24:00

TOP